Build your own Fire Garden Kits Now available

So many people that have hung out with the warmth and played in the sand of my wonderful Fire Gardens have asked me how they could make one of their own. Well I’ve taken the guess work out of all the fittings and sizes and put together a few kits that I use all the time in my work.

Available Kits:

FR12SLP 12″ steel fire ring with low pressure regulator

img_00011

img_0003 img_0007

This is a great set up for 14-22″ sand gardens.

Contains:
12″ steel fire ring, weldable 1/2 coupler, 3/8″ 45 deg to 1/2 NPT fitting (to connect to the gas hose), 1/2 x 2″  brass nipple, Teflon tape, and a low pressure 1/4 FPT regulator with needle valve.

$95.00 plus tax and shipping

Examples of my Fire Gardens Made with this setup

dsc_0391.jpg dsc_0429.jpg dsc_0649.JPG dsc_0746.jpg 10.jpg dsc_0731.jpg fire-ants.jpg 2.jpg

________________________________________________________________

FR12SHP  12″ steel fire ring with a 0-60 psi regulator and a venturi mixer

img_00041

img_0005 img_00061 img_0008

This is a great setup for 14-22″ sand gardens, rocks, high temp glass, or other porous materials etc that need a venturi (gas air mixer) to achieve a clean soot free burn.

12″ steel fire ring, weldable 1/2 coupler, 3/8″ 45 deg to 1/2 NPT fitting (to connect to the gas hose), 2pc 1/2 x 2″ brass nipples, gas orifice (.0250),  Teflon tape, and a high pressure 0-60 psi regulator.

$150.00 plus tax and shipping

Examples of Fire Gardens and Patio Heaters (Replaced the fire ring with unique burners) made with this setup

dsc_0571.jpg dsc_0512.jpg dsc_0538.jpg dsc_0455.jpg 2223831343_81d5c57a70.jpg dsc_0024.JPG

Upgrades to above kits:
18″steel fire ring $22 (good for 24-30″ sand gardens)
12″ stainless steel fire ring $60 (Stainless will last longer and the small gas hole won’t rust shut if you leave in the rain)
18″ stainless steel fire ring $90
img_0001_11
FR18SSLP $185

In addition to these kits you will need a container that is able to handle high temperatures and be fully sealed underneath (leaks or drain holes will also allow gas out). A 55 gal drum works good. The weldable coupler provided will need to be welded though the bottom, legs added, then simply attach the fittings, ring, hose, propane BBQ tank and add sand. Sand should be 3-4″ above the ring. This is a match light system and I like those plumbing torches to light mine. Light the torch, then turn on the gas with the flame above the sand. It will take several seconds for the sand to fill with gas and rise to the top. Once lit it’s time to play in the sand with simple tools. This works best after dark when you can turn the flame down very low tell you only see a blue flame.

Fire is hot! DO NOT TOUCH the sand. It’s sticks and will burn before you can get it off. I would add a safety rail to keep young ones from falling on the hot edge and in the sand. It’s also a great place to keep your tools and rest your feet. 30″ is a great height to stand next to, and 14-18″ is great to sit around. Provide a minimum of 6″ below the coupler on the bottom for the fittings and hose. Keep your sand dry by covering in the rain.

Contact me at 510 444 7007, or email me at books@formandreform.com

www.flickr.com
jon sarriugarte's items Go to jon sarriugarte's photostream